1970 - 1973 Firebird Subframe Body Mount Bushings Set, Self-Locking Interlock Style, Factory Height

Interloc subframe bushings are designed to replace the factory units. They feature a self-locking design that sandwiches the frame and holds it in position. This design eliminates noise that was associated with prior performance body mounts. They are especially recommended if you are installing a subframe connector. The concept of the subframe connector is to reduce chassis flex. Having all the bushings solid allows the subframe connector to do a better job. Six Interloc bushings are supplied with this kit. This includes two radiator core support, four main body bushings and hardware.

Interloc bushings are designed to replace the factory bushings and will fit the 70, 71, 72 and 73 Firebird.

Note: Going to a solid mount body bushing does not increase ride harshness. All you are doing is bolting a subframe solid to the body. This is no different then bolting a crossmember to a current uni-body car.

New hardware included.

Installation tip: The male portion of the mount goes between the body and frame. The female or cupped portion comes up from underneath and indexes over the step in the male bushing, sandwiching the frame.

PART NUMBER: SUS-2009