1970 - 1981 Firebird Power Window Kit, Premium Quality USA Made

New complete power window kit for your 1970 - 1981 2nd Gen Firebird or Trans Am. Exact fit for all 70 - 81 models. Includes; both left hand and right hand regulators, both power motors, wiring harnesses, rubber door jam boots, and hardware. This set comes standard with a plastic chrome style switch. You can upgrade to a metal chrome style switch or several other styles! Don't forget to choose your desired switches and location. Several styles to choose from and either center console or on your door panels. By far the best kit on the market... Premium Quality!

*See Technical Specs for switch options and pricing.

~~NOTE: This is not a universal cheap imported power window kit. This kit is specifically made for your 2nd Gen Firebird right here in the USA! Please double check your options as each kit is especially made for you and are non-refundable.

Kit includes: 2 regulators (left & right side), 2 new ACI motors, completed wire harness, choice of switches, and conduit to protect the wires going thru the door.

PART NUMBER: DWN-624

• (201) Door Mount, Plastic: Bezel: Double: length = 2-7/8"; height = 1-3/4" Single: length = 2"; height = 1-3/4" Hole: Double: length = 2-1/4"; height = 1-1/4" Single: length = 1-3/8"; height = 1-1/4". Looks like Original 77 - 81 Factory Style
  
  (205) Door Mount, BLACK ILLUMINATED Bezel: Double: length = 2"; height = 1-13/16" Single: length = 1-1/8"; height = 1-13/16" Hole: Double: length = 1-13/16"; height = 1-5/8" Single: length = 7/8"; height = 1-5/8". Custom Look!
  
  (207) Door Mount, Metal, Bezel: Double: length = 2-1/2"; height = 1-7/8" Single; length = 1-11/16"; height = 1-3/4" Hole: Double: Length = 2-3/8"; Height = 1-3/8" Single: length = 1-5/8"; height = 1-1/4" Looks like Original 70 - 76 Factory Style
  
  (214) Door Mount, NU-CRANKS SWITCH (USE YOUR ORIGINAL WINDOW CRANK) GM Large Round Spline - Shorter Length: Switch Housing: 2-1/4" x 3" Shaft Length" 7/8" (to include housing 1-1/2") Spline OD: 29/64" (.453) Spline ID: 7/16" (.437). Looks like cranks, but its a switch!
  
  (203) Console Mount, Plastic Bezel: Double: length = 2-7/8"; height = 1-3/4" Hole size: Double: length = 2-1/4"; height = 1-1/4".
  
  (206) Console Mount, BLACK ILLUMINATED Black Double Switch dimensions: Bezel: length = 2"; height = 1-13/16" Hole Size: length = 1-13/16"; height = 1-5/8". Custom Look!
  
  (209) Console Mount, Metal Bezel: Double: length = 2-1/2"; height = 1-7/8" Hole: Double: Length = 2-3/8"; Height = 1-3/8. Looks like Original 70 - 76 Factory Style