 |
 |
 |
 |
|
 |
|
Features
- New Complete Wiring Harness System For Your 79 - 80 Bird!
- 1. A replacement headlight switch with internal 30 amp circuit breaker, retention collar nut, adjustable length shaft, and custom knob.
- 2. Standard turn signal and hazard flashers are mounted on fuse panel. A new horn relay is mounted on the main dash harness. Fuse box designed to fit in original location with no modifications. All required hardware supplied.
- 3. NEW STYLE PUSH IN ATO FUSE PANEL allows for easy fuse and circuit breaker accessibility. Harness is laid out and formed to allow for nearly all aftermarket accessories such as; gauge packages, wiper systems, heat and air conditioning systems, etc.
- 4. Original style switch connector bodies – an American Autowire exclusive feature.
- 5. Steering column connectors can plug directly into many aftermarket steering columns or stock 1977-1980 GM columns that use stock GM turn signal switches.
- 6. Complete factory heater harness assembly included.
- 7. Separate under dash courtesy lamps for use along with your original dome / interior lighting.
- 8. Instrument Cluster wiring is designed with a “cluster harness disconnect” system for easy service and assembly. Original terminals and PC board connector (another American Autowire exclusive) are provided for stock cluster connections. The system will also connect into most popular aftermarket gauges such as AUTOMETER, CLASSIC INSTRUMENTS, DAKOTA DIGITAL, STEWART WARNER, VDO and others.
- 9. Rear body harness assembly plugs into the main harness in the stock location and our longer leads allow for stock or custom routing of the wires. Rear body wiring includes complete backup light leads with correct lamp sockets, complete stop and tail light leads with correct lamp sockets, complete turn signal leads with correct lamp sockets, complete rear side marker leads with correct long focal length molded lamp sockets, complete license plate lead connection to plug into your lamps, and fuel tank sender wire with trunk grommet and tank connection.
- 10. GM bulkhead connectors for the engine and front light wiring are included (another American Autowire exclusive) and allow for easy installation with original or custom routing.
- 11. Engine wiring includes connectors for original points type as well as H.E.I. distributors. Power and tach connectors supplied for GM H.E.I. distributors. Alternator connectors are supplied for GM “SI” series internally regulated alternators. GM “CS” series alternator adapter is available separately.
- 12. Front lighting includes extra-long leads that can be routed for stock or optional appearances. All headlight connectors and terminals, parking and directional light leads and lamp sockets, and side marker leads and lamp sockets are provided along with a switched trigger wire for an electric fan relay (usually recommended with AC).
- 13. All the various connectors and terminals for your windshield wiper / washer system are provided.
- 14. Color schematics and easy to understand installation instructions included.
|
|
|
|
|
|
| Other great products you might need |
|
1969 - 1981 Firebird Heater Box Wire Harness Retaining "J" Clip, Each
|
|
1970 - 1992 Firebird Windshield Antenna Lead Wire Cable
|
|
1967 - 1981 Firebird Wire Harness Retainer Plastic Push In Clip, Each
|
|
1967 - 1981 NEW Custom Firebird CHROME PLATED Alternator, 100 Amp, 1 Wire or 3 Wire
|
|
|
|
|
|
|
|
|
|
|
|
|
1979 - 1981 Firebird Digital LED Sequential Tail Lights Wiring Kit
|
|
Firebird Universal 1-5/16” Firewall Grommet With 1/4” Hole GM # 474579
|
|
Firebird Wire Harness Black Tape Wrap, Non-Cloth OE Style
|
|
1975 - 1981 Pontiac Firebird Wiring Harness Retainer Clip for Radiator Support and Hood Latch Brace, Each
|
|
|
|
|
|
|
|
|
|
|
|
|
1974 - 1980 Firebird and Trans Am Classic Update Rear Window Defroster, Heated Rear Glass Add-on Harness, 510701
|
|
1977 - 1980 Firebird and Trans Am Classic Update Power Window and Door Lock Add-on Harness, 510704
|
|
Wire Stripper, Cutter and Crimper Tool
|
|
|
|
|
|
|
|
|
|
|
|
|