Home > Doors - Windows >

1982 - 1992 Firebird Upper Door Hinge Repair Kit , Greaseable

1982 - 1992 Firebird Upper Door Hinge Repair Kit , Greaseable
 


PART NUMBER: DWN-278G
***DISCONTINUED***

Description
 
Discontinued

This kit contains all required parts for repair of the upper door hinge to regain the original structural integrity. The advantage to this kit over any other available solution, is that you do not have to remove the old hinges, or adjust door alignment. All you need do is remove the old worn pins and bushings and install this kit - probably no more than a two hour job. It is no longer necessary to replace the entire upper hinge assembly. Restore your doors to fit as they did from the factory. As outlined in the GM service manual, replacement of the whole hinge assembly is quite a project! The factory hinge is actually welded to the door, so it must be cut off, and a replacement GM hinge assembly attached with bolts. This really is a pretty slick set up! It can usually be done in about two hours. Installation instructions are included. *One kit will repair 1 door. If you are repairing both doors, you will need 2 kits.

PART NUMBER: DWN-278G
Features
  • 2 Shouldered machined 4041 steel pins
  • 360 degree lubricant pathway
  • 2 grease nipples
  • Electroless nickel plated
  • 2 Machined Phosphor Bronze flanged bushings
  • 2 ARP 12 point high tensile Nuts
  • 0.5ml of Loctite 271 bearing retaining adhesive
  • 4" of special abrasive

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Doors - Windows
Doors - Windows > Door Hinge Repair
Hardware
82-92