Firebird Central | 1969 - 1981 Firebird Type III Gray Anodized Wilwood Front Disc Brake D52 Calipers, Kit, Order Yours Now!

Home > Brake Components >

1969 - 1981 Firebird Type III Gray Anodized Wilwood Front Disc Brake D52 Calipers, Kit

Alternative Views:

Our Price: $440.11

PART NUMBER: BRC-620A

Qty:

Description

1969 - 1981 Firebird Type III Gray Anodized Wilwood Front Disc Brake D52 Calipers, Kit

Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1969 - 1981 Firebird models. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder.

The key difference is that Type III anodizing provides a surface that is more wear resistant and has a smoother and harder finish than standard anodizing.

*Calipers are a Gray Anodized Finish

Kits contain Wilwood’s hardened slide pins and high friction brake pads for better stopping.

*Firebird 1978-81 (with M10-1.5 banjo bolts) will require new hose and banjo bolt.

PART NUMBER: BRC-620A