Firebird Central | 1970 - 1972 Pontiac V8 Engine Intake Manifold and Crossover Mounting Stud, Bolt & Washer Hardware Set, Order Yours Now!

1970 - 1972 Pontiac V8 Engine Intake Manifold and Crossover Mounting Stud, Bolt & Washer Hardware Set

These are the bolts and thick special washers that hold the cast iron heat cross over to the heads and the intake to the heads on all Ram Air IV and 455 HO cars. 1970 was the first year for the studs to hold on all the engine brackets. This saved bolts and you will notice in 1970 there are less brackets on the engine and they are easier to install with the studs. 2 are used on the passenger side if the car had AC and on is used at the throttle bracket and one at the alternator bracket. These are used on all Pontiac V8's.

Works great for all 70 - 72 Pontiac all V8 engines with a heat crossover.

PART NUMBER: ENC-2341