Firebird Central | Firebird Clutch Kit with Pressure Plate, 11 Inch, Coarse Spline, Performance, Get It Today!

RAM Performance HDX Clutch Kit with Pressure Plate, 11 Inch COARSE SPLINE

HDX Clutch sets are the performance upgrade for your daily driver / hot rod. Pressure plates feature increased clamp loads and our 200 Series organic clutch disc. 200 series discs use a premium organic facing material that greatly increases rotational strength. RAM HDX clutch kits are ideal for street / strip applications. They produce 30-60 percent more clamping pressure over stock and feature ductile iron, explosion-resistant pressure rings that meet SFI certifications for use in competition. The HDX disc provides the smooth engagement necessary for maximum performance and drivability. A new flywheel or the resurfacing of the existing flywheel is required before installation.

New clutch and pressure plate kit for your Firebird or Trans Am. Kit includes clutch disc, matched pressure plate, clutch-alignment tool and throw out release bearing. This clutch will fit the new reproduction and used original bellhousings no problem. Please check your clutch and spline size before ordering. Over the years the bellhousing and clutch has probably been changed.

NOTE ~ This is the performance version. It is quite a bit harder to operate than stock replacements. If your left leg is not pretty strong or you foresee a lot of traffic driving, you may want to go with our part # CLU-46

Clutch Size: 11"
Spline: 1 1/8 inch diameter with 10 groove spline count.

PART NUMBER: CLU-46HDX