Firebird Central | Hurst 4 Speed Shifter Linkage Lever Slot Adapter Set for Muncie Transmissions, 5/16", Quality Parts, Low Prices

Hurst 4 Speed Shifter Linkage Lever Slot Adapter Set for Muncie Transmissions, 5/16"

New HURST shift lever linkage slot adapter kit! This kit contains 3 Lever Adapter Bushings. These adapters are used for early 68 or old Muncie transmission with studs on the side plate. Using these adapters you can install 1969 or newer linkage kits where the levers originally used bolts on the side plate. This adapter must be used in slot to fit this arm to Muncie transmission control shaft. Place adapter in arm slot before installing arm on control shaft.

Do you have an early Muncie transmission with a new style shifter and linkage kit?? You need these!!

This is a pack of 3 linkage arm adapters. These will adapt the later GM bolt on style linkage arms to the early stud type shifter shafts. Please make sure you check the proper stud size when ordering. This set is for the 5/16" stud which was used mostly with 1963 to 1965 Muncies. Later model Muncies that used a 3/8" stud will need to be drilled out.

THIS PART ALLOWS THE USE OF THE LATE MUNCIE SHIFT LEVERS ON THE EARLY STUD TYPE ARMS.

PART NUMBER: TRA-173